Three Maintenance Guidelines for an Electric Vibrating Motor
Posted on: 28 December 2016
The electric vibrating motor is a useful component in numerous industrial and commercial machines. This component is designed to provide prolonged service and to withstand the harsh environment after installation. On the other hand, the motor has components which are vulnerable to damage and eventual wear. Therefore, you should ensure that the vibrating motor is serviced regularly for quality and long-term performance. Here are some critical guidelines on electric motor maintenance.
Prevent Moisture Damage
Electric motors are susceptible to damage when exposed to moist environments. Therefore, you should take some preventative measures to control the potential detriments related to this type of exposure. In general, the moisture will penetrate the motor and all the installed steel components will start rusting. This will compromise the motor performance and might even cause premature failure. You can prevent this by regularly oiling the bearing assemblies and other internal modules. The layer of grease will act as a moisture barrier and limit the risk of rusting.
Lubricate With Care
Most equipment owners know the importance of lubricating the components of the electric vibrating motor. However, they do not have the knowledge on how to perform the task to produce the best long-term results. For example, it is not uncommon to find a motor with excess oil on its components. This over-lubrication can cause some operational issues for the module. Therefore, you should ensure that you have used a modest amount of grease and only on the parts which should be lubricated. In addition, choose the lubricant recommended by the motor manufacturer.
Protect from Bad Vibrations
The electric vibrating motor can fail prematurely due to excessive vibrations. Therefore, you should monitor the components for any unsolicited vibratory activity. For instance, if the motor should be idle in the equipment, it should not be shaken or vibrating as if the machinery is running. When this happens, the bearings in the module tend to rub against one another, depleting the applied lubrication grease. Consequently, the metal units will rub against one another, and the friction will accelerate wear and damage. You can prevent most bad vibration by removing all external sources of vibration. Therefore, do not place the vulnerable motor close to tools and equipment that induce vibrations in their surroundings.
Finally, you should engage a licensed equipment technician to perform maintenance on heavy equipment and machines with an electric vibrating motor. The expert will be able to maintain and monitor the performance of the unit for the best long-term results. For more information, contact companies like VSS - Vibration Systems & Solutions (Australia).
Share